SOLUTION PROVIDER
Solution Provider
Solution Provider
Solution Provider
Solution Provider
Solution Provider
Solution Provider
  Diesel Engine
KW
Weight
t
Max torque
kNm
 
SR-35
Evolution
183/179 32,7 151,6
SR-30 Eagle Upgraded
Evolution
149/149 131
SR-30 Eagle Standard
Evolution
149/149 131
SR-45
Advanced
209/209 37-40 185
SR-65
Blue-Tech
272 56,5 258,5
SR-75
Blue-Tech
345 71 293
SR-95
Blue-Tech
455 92 362
SR-105
Blue-Tech
455 92 362
SR-125
Blue-Tech
470 125 496
SR-125
High-Tech
470/470 128 435
SR-135
High-Tech
470/470 131 435
SR-145
High-Tech
470/470 145 435
  Diesel Engine
KW
Weight
t
Max torque
kNm
 
STM-20
119 20 85
STM-30
164 29 130
Piling Rigs
Hydraulic drilling rigs optimally designed to give you the best drilling performance.
SR-65

SR-65 Blue Tech: your brand new next generation piling rig

A GREAT drilling machine, reliable and simple to maintain. A high-performing machine even in the hardest conditions, a machine that is able to ensure comfort and safety to all personnel on site. A machine with low operating costs and ease of transport, with automatic features to ease the work. A machine like the SR-65 Blue Tech, what else?

Blue Tech Line

The new Blue Tech line is the result of the development and improvement of all the advantages of the High Tech line.

  • High productivity for each duty cycle
  • Plug & Play system for all drilling technologies
  • Fuel savings up to 23% per day
  • Low noise and minimun environmental impact
  • Absolute efficency
  • Extreme performance
  • Smart and quick maintenance
  • New operator's cabin

If you wish to know more, click the buttons below!

 

SR-75

Brand new SR-75 Blue Tech

SR-75 Blue Tech blends together state of technology, design and comfort to ensure top performance.

Improved response and better calibrated control of hydraulics make rig operations smoother and performing.

Blue Tech Line

The new Blue Tech line is the result of the development and improvement of all the advantages of the High Tech line.

  • High productivity for each duty cycle
  • Plug & Play system for all drilling technologies
  • Fuel savings up to 23% per day
  • Low noise and minimun environmental impact
  • Absolute efficency
  • Extreme performance
  • Smart and quick maintenance
  • New operator's cabin

SR-75 Blue Tech job-site experience

If you wish to know more, click the buttons below!

 

SR-95

The SR-95 HiT has been upgraded to the Blue Tech version which includes a redesigned operator cabin, new hydraulics and mechanics for an improved efficiency.

Designed around a new energy-saving architecture, the next generation SR-95 Blue Tech is a rig that meets the demands of productivity, flexibility and functionality across all drilling setups and technologies.

SR-105

Designed around a new energy-saving architecture, the next generation SR-105 Blue Tech is a rig that meets the demands of productivity, flexibility and functionality across all drilling setups and technologies.

Higher performance

• Automatic control of rotary motors
• Increased extraction force
• high torque available • More power on too

More efficient

• Optimized lines to the rotary for cutting power loss
• Diesel engine – Auto low idle control for fuel saving • Main pump with Load Sensing system
• Closed circuit on main winch

Truly multipurpose

• 5 technologies: LDP, CFA, DP/TCT, TJ and CAP/CSP/VDW
• Many versions: WCS, CCS, Quick Change, 4-lines pull, the latest ETCW Direct pull and the extended versions.

Environment-friendly

• Complies with the most stringent emission rules
• Lower CO2 emissions
• Improved combustion and cooling efficiency
• Noise reduction

Proven ergonomics

Sliding door, fully adjustable pneumatic suspension seat, new joysticks and keybords

Great visibility

Polycarbonate roof and stratified front glass allow to work without protection grids, LED lights with anti-glare technology and CCTV camera system with dedicated 7” display

Most comfortable

Powerful HVAC system with recirculating air, USB port, USB or wireless phone charger mount, locked glove boxes (one is airconditioned), a large compartment for placing helmet and jacket, two dual cupholders and a file folder

Always connected!

DMS On Board 4.0 DMS PC for a complete production analysis DMS Manager a cloud service for superior fleet supervision

 

If you wish to know more, click the buttons below!

 

SR-125

The Brand New SR-125 has been updated to the Blue Tech version which includes a redesigned operator cab, new hydraulic and mechanical systems improved for greater efficiency.

The machine has enhanced characteristics compared to the previous model, mainly in terms of the performance of the rotary head, with an increased torque value and in the main winch thanks to the adoption of a closed circuit. 

The brand new SR-125 BT in CAP/CSP version represent the top in performance and innovation for this technology.

  • The rig is capable to drill piles up to 1200 mm diameter and 28 m depth and over 30 m with 900 mm diameter.

  • The great performance of the rig is guaranteed thanks to the double independent rotary head that, assisted by the crowd-force of the crowd-winch system, assures the best production rate.

  • The conveying systems, video camera attachments, cat-walk and the Soilmec cab assure the operators comfort and safety.
SR-35

Giant steps are what you take...


The-30-ton-class piling rigs are the ones that more than any others stand for Soilmec.

Since 1995, when the first R-312 was produced, these compact, agile and yet powerful rigs
have become the standard of reference in the field of ground engineering.
From Northwest Territories to Ghana, From Mexico City to Pisa leaning tower, these rigs have
been virtually working in all latitudes tackling a variety of soils, rocks and weather conditions.


After more than 1500 units sold, Soilmec is introducing a new step in the segment.

The brand new SR-35 EVO.

A very fast machine, easy to operate, the best answer to those specialists who are looking for performance and agility on job sites. 
 

If you wish to know more, click the buttons below!

 

SR-30 Eagle Upgraded

The SR-30 Eagle is the smallest model in Soilmec’s line-up of drilling rigs. Built with a lightweight design the rig features a high torque rotary head, powerful Diesel engine and the new segmental mast. The SR-30 Eagle is a modern machine equipped with several accessories, devices and the DMS 4.0 system to ensure the highest level of connectivity, accessibility, and safety.

Latest generation SM segmental mast

  • The segmental mast allows for quick conversion of the rig for different applications.
  • Removing the upper element, to quickly convert to the LHR setup. 
  • Add a rig rotary sleeve kit, auger cleaner and, at your choice, additional mast element for CFA applications.

If you wish to know more, click the buttons below!

 

SR-30 Eagle Standard

The SR-30 Eagle is the smallest model in Soilmec’s line-up of drilling rigs. Built with a lightweight design the rig features a high torque rotary head, powerful Diesel engine and the new segmental mast. The SR-30 Eagle is a modern machine equipped with several accessories, devices and the DMS 4.0 system to ensure the highest level of connectivity, accessibility, and safety.

When Less is...More

  • Less than 30 tons transport weight complete with 4x9 Kelly Bar

  • Less than 30 minutes from truck to piling

  • Only monolithic mast

 

If you wish to know more, click the buttons below!

 

SR-45

Advanced technology and flexibility

The SR-45 has become well known for its characteristics of dynamism and drilling capabilities combined with quick and efficient mobilization for rapid start-up on job sites.

In 2021 the SR-45 brand new model has been upgraded to the HD version which features the segmental mast boosting its versatility and Low Headroom operation capability, in addition to a monolithic HD mast with improved capacity.

SR-125

Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-125 has been specially designed for suiting the following applications:

- LDP cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself;
- LDP deep uncased bored piles stabilized by drilling fluid or dry hole;

SR-135

Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-135 has been specially designed for suiting the following applications:

- LDP cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself;
- LDP deep uncased bored piles stabilized by drilling fluid or dry hole;

SR-145

Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-145 has been specially designed for suiting the following applications:

- LDP cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself;
- LDP deep uncased bored piles stabilized by drilling fluid or dry hole;

STM-20

STM-20 is a drill unit designed to be fast, highly productive and easy to operate. It's a fully hydraulic drilling rig mounted on standard, heavy duty truck.  Thanks to its power, reliability, and novel configuration STM-20 meets the needs for a highly capable, easily mobilized drilling rig.

STM-30
STM-30 is a drill unit designed to be fast, highly productive and easy to operate. It's a fully hydraulic drilling rig mounted on standard, heavy duty 6 x 4 truck. Thanks to its power, reliability and new configuration, the STM-30 meets with the needs for a high performance and easy to mobilize drilling rig.
  Diesel engine
kW
Weight
t
Max torque
kNm
 
SF-65
205 52 165
SF-55
168 37.2 100
CFA
Compact hydraulic drilling rigs specially designed for continuous flight auger piles technology.
SF-65

The SF-65 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique.
The upper structure of the SF-65 is mounted on Soilmec base carrier and has been designed to perform:

- CFA (Continuous Flight Auger) piles by means of long auger string.

SF-55

The new SF-55 delivers the ideal combination of efficiency, smart working and compactness.

Since 1987 when the first CM-48 was produced in Cesena, Soilmec became a landmark for CFA dedicated machines. 

Today, after 3 further models and over 200 units sold, Soilmec launch the next generation of this dedicated CFA rigs.

The new SF-55

The main design elements and the technological innovations come together in this new machine. Increased performance, simplicity and reliability are the results of this new step ahead

 

 

If you wish to know more, click the buttons below!

  Diesel engine
kW
Winch line pull
kN
Weight
t
 
SC-130 HD
563 120
Cranes
Heavy duty hydraulic crawler cranes for different foundation technologies.
SC-130 HD

 

The SC-130HD duty cycle crawler crane by means of its 130 tons load max. capacity, is perfectly suited for the deep foundation most severe type of works.

  Cutting depth
m
Diesel engine
kW
Weight
t
 
SC-130
Cougar
52/70 563 170
SC-135 HD
Tiger
100/120 (150*) 653 135
SC-130 HD
Tiger
100/120 (150*) 563 135
  Panel thickness
mm
Panel width
mm
Body lenght
m
 
SH-30
700/1200 2600/3000 10.5
SH-35
650/1500 2800/3200 10.8
SH-40
800/1800 2800/3200 13
  Max depth
m
Excavation dimension (width x length)
mm
Weight
t
 
GH-20
100 600 /1800 x 2500/4200 16,5/26,5
Hydromill & Grabs

Hydromills with hose wheel and drum hose design for deep diaphragm walls.

Mechanical cable operated and hydraulic grabs for diaphragm wall technology.

SC-135 HD

With the aim of meeting the need for increased diaphragm wall depth in the most challenging soil conditions, Soilmec has designed the “HDD” (Hose Drums Design) hydromill configuration. Hydraulic and mud winders are positioned on a base carrier, allowing high depth drilling performances.

SC-130 HD

With the aim of meeting the need for increased diaphragm wall depth in the most challenging soil conditions, Soilmec has designed the “HDD” (Hose Drums Design) hydromill configuration. Hydraulic and mud winders are positioned on a base carrier, allowing high depth drilling performances.

SC-130

The demand for diaphragm wall equipment suitable to urban areas and the stringent requirement of verticality make the hydromill Cougar a good and easy option to meet the customer’s needs.

The Hose Wheels Design (HWD) is positioned below the cathead so that it can easily follow the hydromill movements with a tensioning and rewinding automatic system. It arises from the need to move simultaneously the hydraulic and bentonite mud circulation hoses to the cutting unit.

The SC-130 Cougar is the high performance HWD series, which excavates up to 70 m of depth with approx. 755 HP ensuring a great level of production rates.

SH-30

The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS.

SH-35

The SH-35 is the Soilmec brand new excavation module. 

  • With an operating weight of between 30 and 38 tons, the SH-35 is assembled on a special heavy frame that allows a wide range of panel thicknesses, from 650 mm to 1500 mm. 
  • To ensure a precise verticality and allow correction of any deviation there are 12 independent mobile flaps, individually controllable. 
  • A new mud pump, hydraulic compensators with improved flow rate and new hydraulic fittings for connecting the motors are some of the developments installed on the equipment.
SH-40

The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface.

Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS.

Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time.

The 40 t class module is suggested for medium-high depth projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x1800 mm. The high torque cutting unit (up to 153 kNm) can be installed.

The module rotation system is included as a standard.

GH-20

The Soilmec hydraulic grabs are the result of years of research and development in mechanical excavation. The collection of data from various sites, tests on different soil types, the study of the performance of difficult soft soils and layers allowed the production of the series of hydraulic grabs more competitive available on the market.

They can operate in any soil type coarse or cohesive. In the presence of large boulders or hard conglomerate formations, we recommend the traditional chiseling.

  Max diameter
mm
Max depth
m
Max torque
kNm
 
SA-40
4000 94 413
Attachment rigs
Diesel and hydraulic crane attachment rigs for large diameter bored piles.
SA-40
Hydraulic crane attachment for large diameter bored piles to be combined with hydraulic Soilmec cranes.

- Max nominal torque: 413 kNm
- Max depth: 90 m
- Max diameter: 4000 mm
  Diesel Engine
KW
Max hoist
kN
Weight
t
 
SM-13e Etech
96 13,8
  Diesel Engine
KW
Max hoist
kN
Weight
t
 
SM-4
115 70 5.8
SM-6
100 52 7
SM-11
116/115 96 11
SM-14
119 89 14
SM-15
142/123 121 16
SM-15 HD
186/179 121 19
SM-18
176 113 19
SM-22
194 140 22
  Diesel Engine
KW
Max hoist
kN
Weight
t
 
ST-20
123 + (90) 67 21
ST-60
135 + (116) 70 60
Microdrilling

Hydraulic drilling rigs designed to perform microipiles, anchors, water wells, corings, consolidations with jet grouting, soil investigation and geothermal applications.

Hydraulic rigs for sub-horizontal consolidations of large section tunnels.

SM-13e Etech

The brand new SM-13e E tech Zero Emission

The SM-13e is the novelty of the Soilmec rigs range.

It is the first electric drilling machine, evolving that path started decades ago, with the advent of the first electric motorized rigs for internal environments and in tunnels (ST-20, ST -60, SM-5E etc ..).

Indeed the SM-13e has not a simply "engine replacement" by connecting  the machine to an electric power cable. 

Engine, rotary and crowd system operates thanks to permanent magnet electric motors feeded by lithium batteries, alternatives to cable power supplies, and fitted with control inverters. 

The SM-13e represents the first step in the development of a whole range of electrified  Soilmec machines, which we call zero Emission of the E-TECH line.

ENVIRONMENTAL FRIENDLY

  • Less environmental pollution due to the electric power supply: higher efficiency, lower noise, lower CO2 and GHG emissions, real green.

REDUCED OPERATING COSTS

  • Higher efficiency of the electric power supply guarantees a reduction in operating costs by up to 56 %

TECHNICAL IMPROVEMENTS & PERFORMANCES

  • Tech specs comparable or even better than diesel rigs in the same class 

  • Speed, Force, Torque measurements (Drilling energy KPI)

  • Torque booster & High torque available

  • High effective power on the tool and improved productivity

e-PERFORMANCES

  • Permanent Magnet Motors: #4 units, same type. Boost mode & Instant torque will reduce the possibility to get stuck in the hole. Slow speed control for jet grouting technology

  • Battery recharging: Fast charging in 1 hour and 40’ using an external charging station and On-board battery charging in 4 hours

  • Battery Management System: BMS is drawn under Soilmec specification for drilling application c/w 3 operative modes: Normal, Eco (elongated battery life), and Boost (increased performances)

FLEXIBILITY

  • Plug-in version: for a cheaper solution and 24/24h working solution

  • Full Battery version: for a 24/24h working solution and any need to manage a cable

  • Standard Battery version: for a 16/24h working solution and any need to manage a cable, less investment cost is required (compared to the full battery)

  • Plug-in and battery connections: all the advantages in the SM13e

SAFETY

  • Cable check

  • Safety pin

  • Insulating screen

  • Not-operative mode

  • Cable protection

  • Fire protection

  • Energy cut-off

  • Short circuit protection

  • Battery isolator

  • Temperature control

SM-4

SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger sister, the SM-5. It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).

SM-6

STANDARD EQUIPMENT

• Steel undercarriage: width 1700 mm and shoes 300 mm
• Load sensing hydraulic system. Main pump: variable axial type
• Kinematic mechanism: Swiveling boom articulation by slew ring on the base machine enables parallel drilling on the tracks up to +/- 90°
• Counter slide: slew ring on mast for +/- 180° rotation
• Sliding mast by cylinder
• Telescopic boom of 400 mm on base carrier
• Modular mast and hoist system by motoreduced
• Rotary cradle with side shifting
• Full radio remote control

 

SM-11

The brand new SM-11 is a versatile, compact and powerful machine.

The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.

It's equipped with an advanced Diesel Engine for optimum performances while reducing fuel consuption.

Thanks to the modular mast and a very high feeding force, the SM-11 is a versatility unit that can be tailored to any customer need and allows low headroom applications.

The SM-11 with its compact design is particularly suitable in urban construction sites and in limited-access job sites.

 

If you wish to know more, click the buttons below!

SM-14

Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth. Featured with Load Sensing System, it has lower running costs and a reduced wear and tear on components.

SM-15

The brand new SM-15 is a compact and versatile machine.

Its design ensures rapid conversions through specific kits to get a variety of versions to be used in many kinds of drilling applications.

The SM-15 guarantees the best performance and stability in any position through a variety of movements and mast inclinations.

It's equipped with with a compact advanced Diesel Engine for optimum performances while reducing fuel consuption.

The SM-15 is particulary suitable in urban construction sites and in confined spaces in general.

 

If you wish to know more, click the buttons below!

SM-15 HD

The brand new SM-15HD is a versatile and powerful machine.

 

A higher degree of flexibility, enhanced  performance and low environmental impact are some of the key points featuring our best selling micropiling rig new design.

 

The SM-15HD is equipped with a larger and more powerful Diesel engine for heavy duty works and a special undercarriage to increase performance in anchoring technology and Jet Grouting. The SM-15HD is particularly suitable to drill when using the double-head system.

 

If you wish to know more, click the buttons below!

 

SM-18

Soilmec SM-18 is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research, thus perfectly responding to the needs of professionals worldwide.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.

SM-22

The new SM-22 is an evolution of the historic PSM-1350 and SM-20 models and have been completely redesigned to ensure high efficiency and productivity levels on site together with the highest safety standards.

ST-20

The ST-20 tunnelling rig is ideal for sub-horizontal consolidation in tunnels with a work radius of between 1512 mm and 4696 mm (with the drilling mast horizontal at 0°). The useful stroke of the rotary allows treatments of up to 14 m (16 with the optional extension).
The drilling mast can be folded in at both ends, reducing the overall dimensions, to make the rig easier to transport both underground and on the road at the end of the job.

The machine has two motors (diesel and electric) of a suitable size for each single motor to perform all the drilling, traversing and positioning operations of the crawler.

ST-60

ST-60 tunnelling rig project was developed to meet the growing need for sub-horizontal consolidation in large-section tunnels using single-boom equipment working with the full section method as an excellent alternative to the double-boom type system traditionally used for this type of job.
The equipment is very flexible and fast to use, also in relation to the importance of the treatments to perform. To reach the maximum heading stroke points with respect to ground level, a special system of thrust blocks and sliding blocks was designed to reach these points in total safety. The machine has a mast for 19000 mm treatments in one pass and 24000 m treatments with matching chuck and optional extensions.

The maximum extension height at 0° with respect to ground level is 10700 mm.
The variability of the height of the thrust block axis of rotation from 850 mm to 4250 mm combined with the column extension allows a work radius of from 3700 mm to 6500 mm. Tunnel lining is over 180°.
Fitted with two motors (diesel and electric) for both drilling and traversing, guaranteeing performance also in case of a breakdown of one of the two units.

Ancillaries
Highly performing auxiliary equipment and accessories dedicated to the use of bentonite and slurry and to the preparation and injectionof water/cement mix.
Mud Line

Soilmec offer a machine, a technology and a solution to meet foundation needs. A comprehensive and technologically advanced jobsite, enriched by IPC technology with highly performing auxiliary equipment and accessories in a Mud product line dedicated to the use of bentonite and slurry.

Grout line

Soimec offer a machine, a technology and a solution to meet foundation needs. A comprehensive and technologically advanced jobsite, enriched by IPC technology with highly performing auxiliary equipment and accessories in a Grout product line dedicated to the preparation and injection of water/cement mix.

Drilling tools
Selecting the correct cutting tool is a complicate decision that any piling contractor will face on every job in order to complete it on time and, therefore, the use of an appropriate tool capable of achieving the overall expected productivity level is vital.
Controls
Electronic devices and instruments dedicated to machine monitoring, data logging, production and fuel consumption, GPS guiding systems and drilling positioning.
Drilling Mate System

Electronic system for drilling equipment control, production supervision and fleet management developed and owned by Soilmec since the late ‘90s.

APS

APS (Automatic Positioning System) is a GPS guidance system that integrates in real-time he topography positioning coordinates and the dialing control parameters of each machine.

News & Journal
Soilmec has been shortlisted with its brand new SM-13e in the "Award for Equipment Innovation" category of the Ground Engineering Magazine Awards 2023.
Events
Join our newsletter
About us

LEADING GROUND ENGINEERING FOR 50 YEARS

Soilmec is an international company leader in design, manufacture, and distribution of equipment for the ground engineering industry.
The company was established in 1969 by entrepreneur Mr. Davide Trevisani as Pali Trevisani (today known as Trevi S.p.A.). Since its inception, Soilmec has always developed safe, innovative, cutting-edge technologies and provided the construction industry the full spectrum of equipment solutions.

Soilmec equipment is used everyday on jobsites all around the world for bridges, viaducts, motorways, tunnels, underground lines, railways and buildings of all types.

Foundations Technology Academy
The innovation acquired by the Trevi Group, a global leader in the foundation engineering sector with over 55 years of experience, becomes available to anyone through FTA, the Foundations Technology Academy, the School of Learning Innovation.